Powered by LiveChatNow! Find a distributor Current Tradeshows

Price And Delivery
Other Parker Filters

Filters, Regulators, Lubricators Combo Units

Filters - Regulators - Lubricants
  • Two- and three-unit combos
  • Metal, polycarbonate, and stainless steel options available
  • Pressures to 250 PSIG
  • Connections from 1/8” to 1½” NPT


Side Box: What is the difference between a FRL and Finite’s H-Series coalescers?
Typically an FRL uses a filter element that is designed to remove particulate contamination only. Finite’s H-Series coalescers are designed to remove liquid (water or oil) aerosols, as well as solid particulate. Coalescers remove 99.97% of 0.01 micron size contamination to provide absolute filtration.

Filters

  1. Pipe Sizes  1/8 thru 1½ Inch
  2. Flows to 310 SCFM
  3. Pressures to 250 PSIG

Air filters are designed to remove airborne solid contaminants, pipe scale, rust, pipe dope, etc., which may plug small orifices or cause excessive wear and premature failure of pneumatic components.
Coalescers

  1. Pipe Sizes 1/8 thru 3/4 Inch
  2. Flows to 44 SCFM
  3. Pressures to 250 PSIG

Coalescing filters are designed to remove 99.9% + of the liquid aerosols, both water and oil, and submicron particulate matter from your pneumatic system. These filters will provide oil free air for applications such as spray painting, air gauging, pneumatic instrumentation,  printing and packaging.

Regulators

  1. Pipe Sizes 1/8 thru 1½ Inch
  2. Flows to 300 SCFM
  3. Pressures to 250 PSIG

Air regulators are designed to provide quick response and accurate pressure regulation for the most demanding industrial applications.

Filter / Regulators

  1. Pipe Sizes 1/8 thru 3/4 Inch
  2. Flows to 90 SCFM
  3. Pressures to 250 PSIG

Filter / Regulators are an excellent choice where accurate pressure regulation and high moisture removal efficiency are required in a space saving package.

Micro-Mist Lubricators

  1. Pipe Sizes 1/4 thru 3/4 Inch
  2. Flows to 90 SCFM
  3. Pressures to 250 PSIG

Micro-Mist Air Lubricators are designed to provide optimum and uniform lubrication with fine micro-mist particles of 2 micron or smaller, to pneumatic components even through complex piping arrangements.

Mist Lubricators

  1. Pipe Sizes 1/4 thru 1 1/2 Inch
  2. Flows to 250 SCFM
  3. Pressures to 260 PSIG

Mist Air Lubricators are designed to provide lubrication for most general applications in a pneumatic system. Units should be installed close to the application ensuring effective distribution of oil to pneumatic components.